Fireweed Community Woodshop upcoming events

Woodshop 101 (all gender/no gender) (03 November 2026)

Wed, 04 Nov 2026 00:00:00 GMT

This class was formerly called "Power Tools 101." Make a cutting board while learning how to use woodshop power tools! We will cover using the electric planer, ripping on the table saw, cross cutting on the miter saw, curved cuts on the bandsaw, and finishing. Standing is required to use the power tools, but seating is available in between tool use. There is a scheduled ten minute noise break halfway through class.

This is a great chance to get to know, or brush up on the most powerful tools in the shop. Take home your very own cherry or maple cutting board at the end.

The materials fee for this class is $20 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

Email hello@fireweedwoodshop.org to request ASL interpretation for this course.

__________________________

Taught by Meena Mangalvedhekar

Make a Picture Frame (all gender/no gender) (04 November 2026)

Thu, 05 Nov 2026 00:00:00 GMT

It can be hard to find just the right picture frame ~especially for one-of-a-kind art~ and custom frames are expensive. Solve that problem by crafting your own!

You will learn in this class:

- How to use the table saw to make a rabbet

- How to cut miters with a miter saw

-How to reinforce corners with a brad nailer and glue

Students are provided with one-inch wide hardwood.

Come to class with dimensions of the piece you want to frame, and we'll take it from there!

Using the power tools involves standing, bending, and light lifting. Students are able to sit when they are not using the tools.

The materials fee for this class is $15 and is included in the class admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Lars James

Open Shop Daytime Session (all gender/no gender) (06 November 2026)

Fri, 06 Nov 2026 16:00:00 GMT

Open shop is a time for you to bring in any projects or crafts you are working on and have access to the tools and the space. While we will have an instructor on staff to help open shop run smoothly and make sure tools are being used safely, this is a self-directed work time NOT class time. Open shop is capped at 7 participants and needs 5 participants to run.

Open Shop Schedule:

9:30 - 10 AM Ask Aria anything! If you need help making a plan, want to talk through process, or have questions about design, come in between 5:30 and 6 PM to talk.

10AM - 12:20 PM Open use of the shop.

12:20 - 12:30 PM Clean up: put away all hand tools and vacuum around power tools and work benches.

Open Shop Rules:

Registrants of open shop MUST have taken power tools 101 or be comfortable and experienced using power tools.

Every attendee of open shop must register. Please no guests without registration!
NO GREENWOOD ON THE BANDSAWS.
NO LATHE USE AT OPEN SHOP. Instead please register for one of our Open Turning Sessions.

Please email aria@fireweedwoodshop.org if you have any questions about open shop or what tools are available to use.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *
_________________________________

Facilitated by Aria Kampfer

November Office Hours & Open Gallery (06 November 2026)

Fri, 06 Nov 2026 19:00:00 GMT

Stop in to tour the woodshop space, pick up online purchases, check the lost&found, browse the art gallery, admire the online auction items, have a neighborly visit! Also available: in person purchases of merch, gift certificates, tools and wood goods. (SPOILER - there's an online auction planned for December with items on display in the gallery starting mid-October)

This is an excellent opportunity to drop off tools and materials you want to donate, ask questions about classes, make suggestions, share ideas. We want to meet you and hear from you.

Leah Van Tassel, Director of Finance and Operations hosts these Office Hours

*no registration needed, just stop in or drop in*

Back entrance will likely be locked; please use front entrance or gallery side door. Sidewalk sign will be out to help direct folks.

December Office Hours: Friday, 12/4 same time 1:00-6pm

Volunteer at the Woodshop (all gender/no gender) (07 November 2026)

Sat, 07 Nov 2026 15:00:00 GMT

Join staff members Leah and Aria at Fireweed to help clean, refresh, and organize the woodshop! There are specific registration types that correspond to time slots and task pairings. There might be some shifts or adaptations to needs that might be time sensitive or feel like priorities, but generally, the first hour is designated as vacuum time - it will be noisy and we will each be operating vacuums to collect dust and clean the entire space to prep for activities that come after the vacuuming. Recommended to sign up for specific time slots.

9:00 vacuuming- each volunteer operates a vacuum. WARNING- noisy the whole time.

10:00 gather as a group, select tasks to tackle in pairs: some options include painting kitchenette, applying leather grips to shave horses, sorting scrap lumber, cutting/sizing scraps for specific uses, get craft and make firestarters from shavings/scraps, get physical and split firewood (outdoor activity), label items on shelving (could include some sorting and organizing).

11:00 check in on progress, tea and coffee break

12:00 regroup, progress updates, take on final tasks/ assignments, snack break

1:00 Finished!

* If you require an accommodation to participate, please indicate so in the registration form. Read about our accommodations policy here. *

_________________________________

Facilitated by Leah Van Tassel and Aria Kampfer

Empowerment Through Repairs: A Hands-On Home Maintenance Course (women + marginalized genders) (08 November 2026)

Sun, 08 Nov 2026 17:30:00 GMT

Are you ready to take control of home repairs? Join the experts from Triple Moon Handy Services, a female owned and operated home repair and renovation company out of Minneapolis, for this hands-on, four-hour workshop designed for women and non-binary individuals to learn essential home maintenance skills. Whether you're a homeowner, renter, or simply want to feel more confident tackling repairs, this course is for you!What You’ll Learn:

~Fixing a leaky faucet and replacing a sink aerator.
~Removing and replacing door knobs and locks.
~Patching holes in drywall and properly using anchors.
~Safely replacing electrical outlets and light fixtures.
~Using common tools like drills, stud finders, and more.
Why Choose This Course?

Hands-on learning: You’ll practice every repair yourself.

Practical skills: Focused on the most common repair issues.

Empowering environment: Supportive and beginner-friendly small group.

What to Bring: Just yourself and a snack and water bottle! We’ll provide all tools and materials.

The materials fee is $15 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Triple Moon Handy Services

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Make A Small Tongue Drum (all gender/no gender) (09 November 2026)

Tue, 10 Nov 2026 00:00:00 GMT

A tongue drum is a melodic percussion instrument made up of different sized "tongues" that resonate different tones when tapped. The tones are changeable depending on the type of wood used, size of the box, and shape of the tongues!

In this class, students will get to choose between 2 and 8 tongues and create their own unique shapes. They will also get to choose the size of the box, with a maximum size of 8 inches by 16 inches.

Learn how to use a coping saw to cut out the tongues, and rabbet and dado joinery to build the box. Rabbet and dado joinery is a common form of box joinery, often used in the making of drawers.

Come and explore the musical capabilities of wood while creating your own one-of-a-kind instrument!

The materials fee for this class is $35 and is included in the cost of admission.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

-----------------------------

Taught by EB Barnard and Aria Kampfer

Hand Tools & Body Awareness: Building a Bridle Mortice Art Display Shelf (all gender/no gender) (10 November 2026)

Wed, 11 Nov 2026 00:00:00 GMT

Tune in to your body and dive in to hand tools skills as we build a beautiful art display shelf. We'll go in-depth on pull saw techniques and use chisels and planes to clean tenons for joint fitting. During this class, we will also improve body awareness to tap into a greater sense of joy, control, and focus while using these hand tools.

The class will start with some silly and challenging coordination and observation exercises, followed by a discussion on techniques for pull saws, chisels, and planes, and then spend the majority of time immersed in the process of cutting and cleaning a tenon to fit into a mortice. Finally, we'll cut the remaining recess to house your favorite decorations.

Whether you're at the start of your woodworking journey, or already in love with hand-cut joinery, this class will provide a relaxing space to improve your skills!

The materials fee is $10 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Matte Segal

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Woodshop 101 (all gender/no gender) (11 November 2026)

Thu, 12 Nov 2026 00:00:00 GMT

This is a great chance to get to know, or brush up on the most powerful tools in the shop. Take home your very own cherry or maple cutting board at the end.

The materials fee for this class is $20 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

Email hello@fireweedwoodshop.org to request ASL interpretation for this course.

__________________________

Taught by Meena Mangalvedhekar

Custom Hardwood Jewelry: Bandsaw, Sanding & Finishing Skills (all gender/ no gender) (12 November 2026)

Fri, 13 Nov 2026 00:00:00 GMT

In this hands‑on class, we’ll take small pieces of hardwood and turn them into unique earrings and pendants.

Your instructor will walk you through bandsaw skills for safely cutting small shapes, and we’ll spend time on sanding techniques that help your creations feel smooth, intentional, and ready for finishing. You’ll also learn how to drill clean, accurate holes sized just right for jewelry hardware. We’ll look at a few different finishing methods — oil, wax, and soft‑sheen options — to bring out the natural color and grain of the wood while keeping everything feeling warm and organic.

To complete your pieces, we’ll go over the basics of attaching jewelry hardware so you can turn your shapes into earrings or pendant necklaces. You can choose from several different metal colors to fit your style.

Optional Add-on Class: Pyrography Wood Jewelry! If you want to keep going, this class pairs beautifully with the pyrography workshop taught by the same instructor next Thursday, Nov. 19 from 6-9 PM. In the pyrography workshop, you’ll learn how to use wood-burning tools to add patterns, textures, and detailed illustrations — either on the pieces you made earlier in the day or on the wood materials provided in the pyrography class. It’s a relaxed, creative way to deepen your skills, explore surface decoration, and leave with even more custom work you’re proud of.

The materials fee is $10 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Jules Bunch

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Open Turning ~masks required~ (all gender/no gender) (13 November 2026)

Fri, 13 Nov 2026 23:00:00 GMT

Open shop but for turning! This open shop is only for students with previous turning experience or those who've taken a turning class with Fireweed. Bowl blanks will be available for purchase but feel free to bring your own prepped wood if you've got a project you are working on. Instructor Abbey Dickhudt will be at the shop to make sure everyone is staying safe. This IS NOT a class. This is a time for self-directed work to make shavings, make mistakes, and ask questions. *Woodshop lathes accommodate limited size blanks. If you have any questions about the wood you want to bring or the lathes, please reach out in advance.

Registrants of open shop MUST have taken Bowl Turning or be comfortable and experienced using turning tools and the lathe.

Every attendee of open shop must register. Please no guests without registration!

Please email hello@fireweedwoodshop.org if you have any questions about open turning or what tools are available to use.

* We do require masking indoors for this class, whatever your vaccination status *
_________________________________

Facilitated by Bozena Scheidel

Be Your Own Handyperson: TRIM 101 (all gender/no gender) (14 November 2026)

Sat, 14 Nov 2026 16:00:00 GMT

Learn about the ins and outs of installing trim. Cut with a miter and coping saw the base, face, and trim and practice installing it with an airnailer. Learn what's behind the wall so your trim is secured properly. This course is designed for beginners. All skill levels welcome.

Please wear closed toed shoes and avoid dangly clothing. During this 4 hour class, students will be standing for the majority of the time. If you have questions about accommodations during class please reach out to fireweedwoodshop@gmail.com

The materials fee for this class is $10 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Melinde Madsen

Spoon Carving (all gender/no gender) (15 November 2026)

Sun, 15 Nov 2026 15:00:00 GMT

Learn how to carve a spoon from a fresh cut tree using traditional Nordic carving techniques. We cover tree anatomy, knife holds for the hook & sloyd knife, drying, and finishing. This class is great for the beginner or the person wanting to learn Sloyd style carving. The class fee includes tool rental, materials, a finishing kit, and safety gloves. Please wear pants and close toed-shoes, as we are going to make some wood chips!

The materials fee for this class is $25 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Katie Speckman

Empowerment Through Repairs: A Hands-On Home Maintenance Course (women + marginalized genders) (15 November 2026)

Sun, 15 Nov 2026 19:00:00 GMT

Practical skills: Focused on the most common repair issues.

Empowering environment: Supportive and beginner-friendly small group.

What to Bring: Just yourself! We’ll provide all tools and materials.

The materials fee is $15 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Triple Moon Handy Services

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Woodshop 101 Daytime Session (all gender/no gender) (16 November 2026)

Mon, 16 Nov 2026 16:00:00 GMT

This is a great chance to get to know, or brush up on the most powerful tools in the shop. Take home your very own cherry or maple cutting board at the end.

The materials fee for this class is $20 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

Email hello@fireweedwoodshop.org to request ASL interpretation for this course.

__________________________

Taught by Aria Kampfer

*Support for this daytime course comes from the Prospect Park Co-op Legacy Fund. Thank you PPCLF!

Make A Small Tongue Drum (all gender/no gender) (16 November 2026)

Tue, 17 Nov 2026 00:00:00 GMT

In this class, students will get to choose between 2 and 8 tongues and create their own unique shapes. They will also get to choose the size of the box, with a maximum size of 8 inches by 16 inches.

Learn how to use a coping saw to cut out the tongues, and rabbet and dado joinery to build the box. Rabbet and dado joinery is a common form of box joinery, often used in the making of drawers.

Come and explore the musical capabilities of wood while creating your own one-of-a-kind instrument!

The materials fee for this class is $35 and is included in the cost of admission.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

-----------------------------

Taught by EB Barnard and Aria Kampfer

Make a Picture Frame (all gender/no gender) (18 November 2026)

Thu, 19 Nov 2026 00:00:00 GMT

It can be hard to find just the right picture frame ~especially for one-of-a-kind art~ and custom frames are expensive. Solve that problem by crafting your own!

You will learn in this class:

- How to use the table saw to make a rabbet

- How to cut miters with a miter saw

-How to reinforce corners with a brad nailer and glue

Students are provided with one-inch wide hardwood.

Come to class with dimensions of the piece you want to frame, and we'll take it from there!

Using the power tools involves standing, bending, and light lifting. Students are able to sit when they are not using the tools.

The materials fee for this class is $15 and is included in the class admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Lars James

Pyrography Jewelry (all gender/no gender) (19 November 2026)

Fri, 20 Nov 2026 00:00:00 GMT

Create unique, handcrafted earrings, a pendant necklace, or both using the art of wood-burning. Learn basic pyrography techniques, design transfer, shading, and finishing, then assemble your pieces into wearable jewelry.

Students will be provided with lightweight basswood 1/16" plywood which can easily be shaped. Alternatively, students can also use hardwood if they attend "Custom Hardwood Jewelry: Bandsaw, Sanding & Finishing Skills" offered on Thursday, Nov. 12.

You’ll be able to customize your hardware by choosing from a range of metal finishes, including gold, rose gold, silver (light or dark), and vintage bronze to complement your design.

This hands-on class will have you leaving with your own custom jewelry and the skills to keep creating.

The materials fee is $10 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Jules Bunch

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Post-and-Rung Stools (all gender/ no gender) (21 November 2026)

Sat, 21 Nov 2026 16:00:00 GMT

In this 2.5 day course, each student will build a post-and-rung stool out of oak or ash and weave a seat from cotton Shaker tape. This class will focus on hand tools, using spokeshaves and drawknives to shape the posts and rungs. We will go over several methods of cutting the tenons on the rungs, and bore matching mortises in the posts. Our final step will be weaving the tops with a cushion filled with the wood shavings we make over the course of the project. The finished stool will be a beautiful and functional piece of furniture that will last for generations, and the skills learned in this class can be carried forward into future chair-making projects. Chair-making is a complex process, so come prepared for a weekend full of hard work and new knowledge! Please notice that this class is two full days 11/21 and 11/22 and then a shorter session on 11/29 to weave the top and complete any loose ends.

The materials fee is $100 and included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Jeanette Torkelson and Anastasia Woodruff

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Post-and-Rung Stools (all gender/ no gender) (22 November 2026)

Sun, 22 Nov 2026 16:00:00 GMT

The materials fee is $100 and included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Jeanette Torkelson and Anastasia Woodruff

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Picture Frames with Splines Daytime Session (all gender/no gender) (23 November 2026)

Mon, 23 Nov 2026 16:00:00 GMT

Do you want to both practice your skills with power tools and build a picture frame for a custom piece in your home? This class is for you! We will build a picture frame with splines using the table saw, miter saw, and sander. You'll get some time with all of the power tools to increase your comfort level during the class. Students will have extra time with the table saw to build a reinforcing spline in each corner. The splines provide strength and style for your hand-built frame to last a lifetime. Students should come to class with dimensions of the art piece they want to frame, and we'll build a basic frame out of oak, cherry, or maple.

The materials fee for this class is $15 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Julie Arnold

*Support for this daytime course comes from the Prospect Park Co-op Legacy Fund. Thank you PPCLF!

Open Shop ~ Masking Required (all gender/no gender) (23 November 2026)

Mon, 23 Nov 2026 23:30:00 GMT

Open Shop Schedule:

5:30 - 6 PM Ask Aria anything! If you need help making a plan, want to talk through process, or have questions about design, come in between 5:30 and 6 PM to talk.

6 - 8:20 PM Open use of the shop.

8:20 - 8:30 PM Clean up: put away all hand tools and vacuum around power tools and work benches.

Open Shop Rules:

Registrants of open shop MUST have taken power tools 101 or be comfortable and experienced using power tools.

Every attendee of open shop must register. Please no guests without registration!
NO GREENWOOD ON THE BANDSAWS.
NO LATHE USE AT OPEN SHOP. Instead please register for one of our Open Turning Sessions.

Please email aria@fireweedwoodshop.org if you have any questions about open shop or what tools are available to use.

* Masking is required in this class *
_________________________________

Facilitated by Aria Kampfer

Open Craft: November Community Carving & Hand Tool Crafting Hangout (BYO projects) (24 November 2026)

Wed, 25 Nov 2026 00:30:00 GMT

This craft hang is a gathering in the hand tools classroom at Fireweed Woodshop. The purpose is for carvers and crafters to get together around making and crafting, share skills, get to know each other, enjoy the woodshop's space, build community and belonging, and inspire each other in our creative endeavors. It's also perfect for anyone who started a spoon during a class and would like to use Fireweed's carving knives to finish it.

Other handcrafting projects could include woodblock carving, figure carving, kolrosing, chip carving, knitting, crochet, etc....

6:30-8:30pm Registration is free or give what you can without pressure!

Bring your own project to the shop for some company, community, and sharing tips and tricks. This is NOT A CLASS, it's an art hangout.

What to bring:

-your project (all handcrafts welcome!) Spoon blanks and dala horse blanks available for purchase

- your carving tools (we can loan fireweed's carving tools if you do not have your own)

*Please use the accommodation request field during registration if you need other participants to mask during this event - we do it for community as needed!

Post-and-Rung Stools (all gender/ no gender) (29 November 2026)

Sun, 29 Nov 2026 16:00:00 GMT

The materials fee is $100 and included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Jeanette Torkelson and Anastasia Woodruff

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

BIPOC Centered Woodshop 101 (all gender/no gender) (30 November 2026)

Tue, 01 Dec 2026 00:00:00 GMT

Join us for a special BIPOC (Black, Indigenous, and People of Color) centered class to practice the basics of Woodshop Power Tools

This class was formerly called "Power Tools 101." Make a cutting board while learning how to use woodshop power tools! We will cover using the electric planer, ripping on the table saw, cross cutting on the miter saw, curved cuts on the bandsaw, and finishing. This is a great chance to get to know, or brush up on the most powerful tools in the shop. Take home your very own cherry or maple cutting board at the end.

The materials fee for this class is $20 and is included in the admission cost.

This class is intended for BIPOC students.

Email hello@fireweedwoodshop.org to request ASL interpretation for this course.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

-----------------------------

Taught by Meena Mangalvedhekar (@meenanew) Bio 1. Bio 2.

Elderberry Syrup Making (all gender/no gender) (01 December 2026)

Wed, 02 Dec 2026 00:00:00 GMT

Elderberry is a powerful ally for cold and flu and Covid season, and an easy herb to love to take! In this class, herbalist Emily Pearson Ryan will introduce students to the many uses of Elder-berry (and blossom!) - most famously the plant's immune-boosting power. Then we will craft a delicious warming syrup together.

Students will take home one 8-ounce (or two 4-ounce) bottles of fresh syrup and recipes to make more.

The materials fee for this class is $20 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Emily Pearson Ryan

Make a Picture Frame (all gender/no gender) (02 December 2026)

Thu, 03 Dec 2026 00:00:00 GMT

It can be hard to find just the right picture frame ~especially for one-of-a-kind art~ and custom frames are expensive. Solve that problem by crafting your own!

You will learn in this class:

- How to use the table saw to make a rabbet

- How to cut miters with a miter saw

-How to reinforce corners with a brad nailer and glue

Students are provided with one-inch wide hardwood.

Come to class with dimensions of the piece you want to frame, and we'll take it from there!

Using the power tools involves standing, bending, and light lifting. Students are able to sit when they are not using the tools.

The materials fee for this class is $15 and is included in the class admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Lars James

Spindle Turning — Make a Rolling Pin (all gender/no gender) (03 December 2026)

Fri, 04 Dec 2026 00:00:00 GMT

Calling all bakers, chefs and hobbyists! Novices and pros alike!

Learn the basics of spindle turning in this fun, beginner-friendly course. Class will introduce the anatomy of the lathe and students will learn the techniques to turn a maple or walnut rolling pin. Course will also cover sanding and food-safe finishes.

The materials fee for this course is $20 and is included in the admissions cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Elle Curran

Office Hours & Open Gallery (04 December 2026)

Fri, 04 Dec 2026 19:00:00 GMT

This is an excellent opportunity to drop off tools and materials you want to donate, ask questions about classes, make suggestions, share ideas. We want to meet you and hear from you.

Leah Van Tassel, Director of Finance and Operations hosts Office Hours

*no registration needed, just stop in or drop in*

Back entrance will likely be locked; please use front entrance or gallery side door. Sidewalk sign will be out to help direct folks.

Wall-Hung Shelf (all gender/ no gender) (05 December 2026)

Sat, 05 Dec 2026 15:00:00 GMT

From colorful or clean to elegant or playful, design and build a shelf while practicing foundational woodworking skills. Folk Art shelves often turn a simple, useful object into something expressive through shape, proportion, repetition, and ornament. In this class, we’ll explore these ideas through curves, silhouettes, and simple motifs as we design our own three-shelf piece either to sit on a desk or hang on the wall. We’ll begin with the same materials and structural framework, then make choices within those parameters to create a unique piece. Using handsaws and chisels, we’ll cut and fit mortise and tenon joinery, secured with a wedge that draws the shelves tightly into the uprights. This variation, called a tusk tenon, is a traditional joint found in furniture ranging from cabinets to dining tables. The finished shelf will be approximately 18” wide and 24” tall, with three shelves 6” deep. Come explore how traditional joinery can provide a sturdy framework for playful and personal design.

There will be a 30-minute lunch break each day and you are encouraged to bring food. There is a fridge and microwave onsite.

The materials fee is $97 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Lauren Newby

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Wall-Hung Shelf (all gender/ no gender) (06 December 2026)

Sun, 06 Dec 2026 15:00:00 GMT

There will be a 30-minute lunch break each day and you are encouraged to bring food. There is a fridge and microwave onsite.

The materials fee is $97 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

_________________

Taught by Lauren Newby

{Put class description here. Courier 16 pt font. Include masking note in bold below.}

{Insert photo. 8 px margins. Image right, text wraps left}

The materials fee is {insert materials fee} and included in the admission cost.

{ <===== Don't forget to add tags}

* We do require masking indoors, whatever your vaccination status *

_________________

Taught by {Insert Instructor name here}

Woodshop 101 Daytime Session (all gender/no gender) (07 December 2026)

Mon, 07 Dec 2026 16:00:00 GMT

Make a cutting board while learning how to use power tools. We will cover using the electric planer, ripping on the table saw, cross cutting on the miter saw, curved cuts on the bandsaw, and finishing. Standing is required to use the power tools, but seating is available in between tool use. There is a scheduled ten minute noise break halfway through class.

This is a great chance to get to know, or brush up on the most powerful tools in the shop. Take home your very own cherry or maple cutting board at the end.

The materials fee for this class is $20 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

Email hello@fireweedwoodshop.org to request ASL interpretation for this course.

__________________________

Taught by Aria Kampfer

*Support for this daytime course comes from the Prospect Park Co-op Legacy Fund. Thank you PPCLF!

Picture Frames with Splines Daytime Session (all gender/no gender) (08 December 2026)

Tue, 08 Dec 2026 16:00:00 GMT

The materials fee for this class is $15 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Julie Arnold

*Support for this daytime course comes from the Prospect Park Co-op Legacy Fund. Thank you PPCLF!

Open Shop (all gender/no gender) (08 December 2026)

Tue, 08 Dec 2026 23:30:00 GMT

Open Shop Schedule:

5:30 - 6 PM Ask Aria anything! If you need help making a plan, want to talk through process, or have questions about design, come in between 5:30 and 6 PM to talk.

6 - 8:20 PM Open use of the shop.

8:20 - 8:30 PM Clean up: put away all hand tools and vacuum around power tools and work benches.

Open Shop Rules:

Registrants of open shop MUST have taken power tools 101 or be comfortable and experienced using power tools.

Every attendee of open shop must register. Please no guests without registration!
NO GREENWOOD ON THE BANDSAWS.
NO LATHE USE AT OPEN SHOP. Instead please register for one of our Open Turning Sessions.

Please email aria@fireweedwoodshop.org if you have any questions about open shop or what tools are available to use.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *
_________________________________

Facilitated by Aria Kampfer

Open Craft: Explore Figure Carving with Alyssa P. - Community Carving & Hand Tool Crafting Hangout (all gender/no gender) (09 December 2026)

Thu, 10 Dec 2026 00:30:00 GMT

This special edition craft hang is hosted by Alyssa. The purpose of the figure carving theme is for carvers and crafters to get together around making and crafting, learn from Alyssa's wealth of experience and creativity, share skills, get to know each other, enjoy the woodshop's space, build community and belonging, and inspire each other in our creative endeavors. Practice materials will be provided and the Woodshop's carving tools available to use.

6:30-9:00pm Registration is free or give what you can without pressure!

Bring your own project to the shop or just bring yourself for some company, community, and sharing tips and tricks. This is NOT A CLASS, it's an art hangout.

What to bring:

- your project (all handcrafts welcome!) figure carving blanks available during this hang out

- your carving tools (we can loan fireweed's carving tools if you do not have your own)

*Please use the accommodation request field during registration if you need other participants to mask during this event - we do it for community as needed!

Woodshop 101 (all gender/no gender) (10 December 2026)

Fri, 11 Dec 2026 00:00:00 GMT

This is a great chance to get to know, or brush up on the most powerful tools in the shop. Take home your very own cherry or maple cutting board at the end.

The materials fee for this class is $20 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

Email hello@fireweedwoodshop.org to request ASL interpretation for this course.

__________________________

Taught by Meena Mangalvedhekar

Pop Up Maker's Market and Gallery Open House (11 December 2026)

Fri, 11 Dec 2026 06:00:00 GMT

An Open House and Pop Up Market featuring goods made by instructors, students, and friends of Fireweed.

Friday, December 11th 3:30-7:00pm

Saturday, December 12th 10:00-3:00

Sunday, December 13th 1:00-5:00

Spoon Carving (all gender/no gender) (12 December 2026)

Sat, 12 Dec 2026 15:00:00 GMT

The materials fee for this class is $25 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Katie Speckman

Woodshop 101 (all gender/no gender) (14 December 2026)

Tue, 15 Dec 2026 00:00:00 GMT

This is a great chance to get to know, or brush up on the most powerful tools in the shop. Take home your very own cherry or maple cutting board at the end.

The materials fee for this class is $20 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

Email hello@fireweedwoodshop.org to request ASL interpretation for this course.

__________________________

Taught by Meena Mangalvedhekar

Make a Wooden Rollie Toy (women + marginalized genders) (15 December 2026)

Wed, 16 Dec 2026 00:00:00 GMT

Make a handmade toy for your little one, a little one in your life, or yourself! (You deserve it!) You can design your own or use one of the patterns available. This class will teach a few basic woodworking skills, and you will leave with a finished toy. You will be using a bandsaw, drill press, belt sander, laminate router (optional), hammer, and sandpaper.

The materials fee for this class is $20 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

--------------------------------------------
This class is taught by Kate Schiffler(@bbfurnituremn)

BIPOC Centered Make a Picture Frame (all gender/no gender) (16 December 2026)

Thu, 17 Dec 2026 00:00:00 GMT

Join us for a special BIPOC (Black, Indigenous, and People of Color) centered class to practice the basics of Woodshop Power Tools

It can be hard to find just the right picture frame ~especially for one-of-a-kind art~ and custom frames are expensive. Solve that problem by crafting your own!

You will learn in this class:

- How to use the table saw to make a rabbet

- How to cut miters with a miter saw

- How to reinforce corners with a brad nailer and glue

Students are provided with one-inch wide hardwood.

Come to class with dimensions of the piece you want to frame, and we'll take it from there!

Using the power tools involves standing, bending, and light lifting. Students are able to sit when they are not using the tools.

The materials fee for this class is $15 and is included in the class admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Lars James

Open Turning ~masks required~ (all gender/no gender) (17 December 2026)

Fri, 18 Dec 2026 00:00:00 GMT

Open shop but for turning! This open shop is only for students with previous turning experience or those who've taken a turning class with Fireweed. Bowl blanks will be available for purchase but feel free to bring your own prepped wood if you've got a project you are working on. Instructor Elle Curran will be at the shop to make sure everyone is staying safe. This IS NOT a class. This is a time for self-directed work to make shavings, make mistakes, and ask questions. *Woodshop lathes accommodate limited size blanks. If you have any questions about the wood you want to bring or the lathes, please reach out in advance.

Registrants of open shop MUST have taken Bowl Turning or Spindle Turning and be comfortable and experienced using turning tools and the lathe.

Every attendee of open shop must register. Please no guests without registration!

Please email hello@fireweedwoodshop.org if you have any questions about open turning or what tools are available to use.

* We do require masking indoors for this class, whatever your vaccination status *
_________________________________

Facilitated by Elle Curran

Bandsaw Hair Pins & Sticks - Masks Required (all gender/no gender) (18 December 2026)

Fri, 18 Dec 2026 19:00:00 GMT

Want to make custom hair accessories? This class will allow you to make a hair pin and/or chop sticks or shawl pin of your own design while getting familiar with using the bandsaw, combo sander, vice, hand sanding techniques, and wood grain. Come with an idea of how many tines your dream hair pin holds and fun shapes! Design considerations will be discussed. We will have a selection of woods to choose from. You will leave class with at least 1 finished piece, possibly more depending on how much finishing your design requires.

Please wear closed toed shoes and avoid dangly clothing. During this 2 hour class, students will be standing for the majority of the time, if you require reading glasses, you will want to bring them to class, fine motor skills and dexterity needed for hairpins with intricate designs, less dexterity and vision required for sleeker designs.

The materials fee for this class is $10 and is included in the admission cost.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Leah Van Tassel

Spindle Turning - Make a Candle Holder (all gender/no gender) (19 December 2026)

Sat, 19 Dec 2026 16:00:00 GMT

Learn the basics of spindle turning in this fun, beginner-friendly course! You will learn how to operate the lathe, properly use a spindle gouge, explore form, and turn wood. This class will cover all the steps to make a candlestick holder. You will leave with your own turned, sanded, and oiled candlestick holder and the foundations of spindle turning!

The materials fee is $35 and is included in the cost of admission.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Elle Curran

Spindle Turning - Make a Candle Holder (all gender/no gender) (19 December 2026)

Sat, 19 Dec 2026 20:30:00 GMT

The materials fee is $35 and is included in the cost of admission.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Elle Curran

Be Your Own Handy Person: Construction Tools (all gender/no gender) (20 December 2026)

Sun, 20 Dec 2026 16:00:00 GMT

Measure, mark, cut, and attach! This class introduces basic handheld power tools: drill, impact driver, circular saw, jigsaw, oscillating multitool, and sawzall. Class will also cover tape measures and proper marking tequiniques to set your power tool usage up for success. Students will leave with new tool skills, as well as basics on different types of screws, bits, and blades to make you confident in your next home project (and during all the hardware store trips along the way). We will spend time with each tool, where you will have an opportunity to learn and practice and combine methods throughout class. This is a beginner class- we expect little to no prior expecience with any tools.

The materials fee is $10 and is included in the cost of admission.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *

__________________________

Taught by Kate Hill

Open Shop (all gender/no gender) (21 December 2026)

Mon, 21 Dec 2026 23:30:00 GMT

Open Shop Schedule:

5:30 - 6 PM Ask Aria anything! If you need help making a plan, want to talk through process, or have questions about design, come in between 5:30 and 6 PM to talk.

6 - 8:20 PM Open use of the shop.

8:20 - 8:30 PM Clean up: put away all hand tools and vacuum around power tools and work benches.

Open Shop Rules:

Registrants of open shop MUST have taken power tools 101 or be comfortable and experienced using power tools.

Every attendee of open shop must register. Please no guests without registration!
NO GREENWOOD ON THE BANDSAWS.
NO LATHE USE AT OPEN SHOP. Instead please register for one of our Open Turning Sessions.

Please email aria@fireweedwoodshop.org if you have any questions about open shop or what tools are available to use.

* If you require an accommodation to take this class, please indicate so in the registration form. Read about our accommodations policy here. *
_________________________________

Facilitated by Aria Kampfer